AGA-POWER-LIFT X-Ray Tables
Overview
The AGA-POWER-LIFT (with electric height adjustment) and AGA-POWER-DUO-LIFT (with electric height and tilt adjustment) tables have been specially developed for use in the X-ray field of application. One of their main features is the absence of longitudinal brace at the front of the leg frame, allowing the free positioning of a C-arm. We have recently expanded on these two X-ray table versions by adding battery powered models, equipped with rechargeable batteries.
The X-ray tables AGA-POWER-LIFT with height adjustment (electric) are presented on this page.
- Height adjustment mechanism – Electric motors, with hand switch, 2 buttons (up/down)
- Height adjustment range 550 – 800 mm
- Tilt adjustment : not available (see AGA-POWER-DUO-LIFT)
- Widths – 650 mm / 800 mm
- Length – 1900 mm
- One-piece or two-piece tabletop
- Maximum load – 150 kg
- Product weight – 90 kg
- Lacquered frame, see Frame Colours
RGL-1065/EE, PAL-190-65, LR/Z-125 (H: 700-950 mm)
X-ray tables with electric height adjustment
- The radiolucent table surface (X-ray-permeable PE regenerate support plates) has a thickness of 15 mm (for table width 650 mm) or 25 mm (for table width 800 mm).
- For enhanced stability, the leg frame is equipped with levelling screws.
- On the standard AGA-POWER-LIFT the size of the area without any metal parts is at least 1300×600 mm (LxW), between the drives.
- Please note that the areas of the headrest and the transition to the main surface, can only be x-rayed to a limited extent due to the hinges and the headrest adjustment mechanisms.
- The dual electric anodized light alloy lifting columns are controlled by low-voltage, ultra-quiet electric motors and a hand switch.
Drive specifications for each motor unit: 230V, 50/60Hz, 6,0A, 240W, IPX6, v=16mm/s, 2x1000N.
Options
- One-piece tabletop (RGL-1065/EE and RGL-1080/EE) or
- Two-piece tabletop (RGL-1065/KEE and RGL-1080/KEE) with headrest (length approx. 500 mm) positively adjustable by grid. As a standard, the headrest is located on the right-hand side (next to the transformer/hand switch). It can be built on the left-hand side if requested at ordering time.
- To provide a comfortable lying position for the patient, upholstered pads are recommended. They have a thickness of 40 mm, easily attach onto the upper frame of the table with hook and loop closures and are available with a width of 650 mm (Article No. PAL-190-65) and 800 mm (Article No. PAL-190-80). The 21 available upholstery colours may be found here.
- Additional table sizes or lengths can be custom-built upon request. Please contact us for further information.
Mobility
For mobile use, the X-ray tables may be equipped with castors:
- Castors, Ø 75 mm – Article No. LR-75
- Castors, Ø 125 mm – Article No. LR-125
A set includes four castors, two of which with locking function. At time of ordering, please indicate the required total height of the table (including castors).
- Castors with central locking system LR/Z-125 for enhanced mobility and comfort of use.
All four double castors (Ø 125 mm) are connected by rods. A foot pedal to lock in position or release is located at the head and foot ends of the table (press once). At time of ordering, please indicate the required total height of the table, including castors (either 650-900 mm or 700-950 mm). Retrofitting is not possible.
Accessories
Further optional accessories (paper roll holder, standard rails, side guards and IV pole) are listed on the next page ‘Accessories for X-Ray tables’.
Push bars, wall guards and an all-around frame protector are also available for the X-ray tables. Please contact us for pricing information.
Easy positioning of a C-arm with the AGA-POWER-LIFT
Upholstered pads for better patient comfort
To provide a additional comfort for the patient while lying position, we recommend the optional 40 mm-thick upholstered pads. The pads, available in 21 upholstery colours are easily attached onto the upper frame of the table by hook and loop closures.
- Upholstered pad, width 65 cm – Article No. PAL-190-65
- Upholstered pad, width 80 cm – Article No. PAL-190-80
