AGA-POWER-DUO-LIFT X-Ray Table
AGA-POWER-DUO-LIFT X-Ray Table
Oveview
Our X-ray tables are not only available with electric height adjustment (AGA-POWER-LIFT), but also with electric height and tilt adjustment, on the model called AGA-POWER-DUO-LIFT. Here as well, the longitudinal brace in the front of the leg frame was removed to allow the free positioning of a C-arm.
- Height adjustment mechanism – Low-voltage electric motors with hand switch – Height adjustment range 550 – 800 mm
- Tilt adjustment – Low-voltage electric motors with hand switch
- Trendelenburg and reverse Trendelenburg positioning up to 11°
- Simultaneous height and tilt adjustment with hand switch
- Widths 650 mm / 800 mm
- Length 1900 mm
- One-piece or two-piece tabletop
- Maximum load 150 kg
- Product weight 90 kg
- Lacquered frame, see Frame Colours
X-ray tables with electric height and tilt adjustment
- The X-ray-permeable PE regenerate support plates have a thickness of 15 mm (for a table width of 650 mm) or 25 mm (for a table width of 800 mm).
- For enhanced stability, the leg frame is equipped with levelling screws.
- In the standard versions of the AGA-POWER-DUO-LIFT (electric adjustments), there is an area of at least 1300×600 mm (LxW), with no metal parts, between the drives.
- Please note that the areas of the headrest and the transition to the main surface, can only be x-rayed to a limited extent due to the hinges and the headrest adjustment mechanisms.
- The dual electric anodized light alloy lifting columns are controlled by low-voltage, ultra-quiet electric motors and a hand switch.
Specifications for each motor 230V, 50/60Hz, 6,0A, 240W, IPX6, v=16mm/s, 2x1000N. - The hand module enables simultaneous height and tilt adjustment. With full use of both motorized adjustments, a Trendelenburg and reverse Trendelenburg positioning up to 11° is possible.
Options
Mobility
For mobile use, the X-ray tables may be equipped with castors:
- Castors, Ø 75 mm – Article No. LR-75
- Castors, Ø 125 mm – Article No. LR-125
A set includes four castors, two of which with locking function. At time of ordering, please indicate the required total height of the table (including castors).
- Castors with central locking system LR/Z-125 for enhanced mobility and comfort of use.
All four double castors (Ø 125 mm) are connected by rods. A foot pedal to lock in position or release is located at the head and foot ends of the table (press once). At time of ordering, please indicate the required total height of the table, including castors (either 650-900 mm or 700-950 mm). Retrofitting is not possible.
LR-125 LR/Z-125
Accessories
Further optional accessories (paper roll holder, standard rails, side guards and IV pole) are listed on the next page ‘Accessories for X-Ray tables’ and on page 27 of the AGA catalogue.
Push bars, wall guards and an all-around frame protector are also available for the X-ray tables. Please contact us for pricing information.
Simultaneous adjustments with user-friendly hand module
Upholstered pads for better patient comfort
To provide a additional comfort for the patient while lying position, we recommend the optional 40 mm-thick upholstered pads. The pads, available in 21 upholstery colours are easily attached onto the upper frame of the table by hook and loop closures.
- Upholstered pad, width 65 cm – Article No. PAL-190-65
- Upholstered pad, width 80 cm – Article No. PAL-190-80
