Battery powered X-ray tables
Overview
The X-ray tables AGA-POWER-LIFT (with electric height adjustment) and AGA-POWER-DUO-LIFT (with electric height and tilt adjustments) have been specially developed for use in the field of radiology. The absence of a longitudinal brace at the front of the leg frame makes the use of a C-arm easily possible. These two X-ray tables are now available in a battery powered version.
The new X-ray table models presented below, AGA-AKKU-POWER- LIFT (with height adjustment) and AGA-AKKU-POWER-DUO-LIFT (height and tilt adjustments) are equipped with rechargeable batteries for greater versatility of use.
- Height adjustment range 460-860 mm
- Height adjustment mechanism – Rechargeable battery pack with hand switch (2 buttons, up and down)
- Battery charger included
- Tilt adjustment (NAC models only) – Rechargeable battery pack with hand switch (6 buttons for simultaneous height and tilt adjustment)
- Trendelenburg and reverse Trendelenburg positioning up to 17° (NAC models only)
- Widths 650 mm / 800 mm
- Length 1900 mm
- One-piece or two-piece tabletop
- Maximum load 150 kg
- Product weight 90 kg
- Lacquered frame, see Frame Colours
X-ray tables with battery powered height adjustment / height and tilt adjustment
- The radiolucent table surface has a thickness of 15 mm (for table width 650 mm) or 25 mm (for table width 800 mm).
- The size of the metal-free area is 1200×600 mm (LxW), between the drives.
- Please note that the areas of the headrest and the transition to the main surface can only be x-rayed to a limited extent due to the hinges and the headrest adjustment mechanisms.
- For enhanced stability, the leg frame is equipped with levelling screws.
Options
- One-piece tabletop (RGL-1065/AC and RGL-1080/AC, RGL-1065/NAC and RGL-1080/NAC) or
- Two-piece tabletop (RGL-1065/KAC and RGL-1080/KAC, RGL-1065/NKAC and RGL-1080/NKAC) with headrest (length approx. 500 mm) positively adjustable by grid. As a standard, the headrest is located on the right-hand side (next to the transformer/hand switch). It can be built on the left-hand side if requested at ordering time.
Additional table sizes or lengths can be custom-built upon request. Please contact us for further information.
Mobility
The X-ray tables are also available in a mobile version, with :
- Castors, Ø 75 mm – Article No. LR-75
- Castors, Ø 125 mm – Article No. LR-125
A set includes four castors, two of which are lockable.
- Central locking castor system, for enhanced maneuverability and comfort of use – Article No. LR/Z-125
All four double castors (Ø 125 mm) are connected by rods. A foot pedal to lock in position or release is located at the head and foot ends of the table.
Note: With castors, the overall height of the table will change (620-1020 mm). Please contact us for more information.
LR-125 LR/Z-125
Accessories
SG-1000/BK A-2047 OPS-40/A
Upholstered pads for better patient comfort
To provide a additional comfort for the patient while lying position, we recommend the optional 40 mm-thick upholstered pads. The pads are easily attached onto the upper frame of the table by hook and loop closures. See your selection of 21 available upholstery colours.
- Upholstered pad, width 65 cm – Article No. PAL-190-65
- Upholstered pad, width 80 cm – Article No. PAL-190-80
