MRI Patient Transport Tables – with hydraulic height adjustment
Overview
Our product line of MRI-compatible patient transport tables/stretchers with hydraulic height adjustment includes four different versions: with or without side guards, and in the widths of 650 or 800 mm.
- Height adjustment range 620 – 980 mm with hydraulic foot pump
- Widths 650 mm / 800 mm
- Length 1900 mm (head section 500 mm, main section 1400 mm)
- Two-piece tabletop
- Locking castors Ø100 mm
- Continuously adjustable headrest +40°, with clamping rod mechanism
- Maximum load 200 kg
- Product weight 80 kg
- Stainless Steel Frame
- 21 Upholstery Colours available
They are made of very slightly magnetic stainless steel and suitable for all MR systems up to 3 Tesla (according to their compatibility data sheets).
The MRI patient transport tables with hydraulic height adjustment can be used safely under the following conditions:
- Static magnetic field of maximum 3 Tesla or less,
- Additionally a spatial gradient of maximum 10,5 T/m or less,
- The table may not exceed the limit of 10,5 T/m with the head end side/foot end side in sliding in the direction of the magnet.
H-AWL 3065/Y 980VA
MRI patient transport tables with user-friendly hydraulic height adjustment
- The AGA MRI patient transport tables H-AWL 3065/Y 980VA and H-AWL 3080/Y 980VA include two adjustable side guards (800 x 250 mm, LxW) and multidirectional castors (Ø100 mm, all with brakes).
- In order for these MRI tables to be accessed from both sides, the side guards can be adjusted up or down with a simple rotation mechanism and locked in place with a sliding bolt.
- The height-adjustable MRI tables are available in two standard tabletop widths of 650 mm (Article No. H-AWL 3065/Y 980VA) and 800 mm (Article No. H-AWL 3080/Y 980VA).
- However, please take into consideration the overall width including the side guards: With side guards, model H-AWL 3065/Y 980VA has a total width of 795 mm and H-AWL 3080/Y 980VA, a total width of 975 mm.
- The MRI patient transport tables H-U 3065/Y 980LRVA and H-EKG 3080/Y 980LRVA feature four locking castors (Ø100 mm) but do not include side guards.
Accessories
The following optional accessories are available for our MRI patient transport tables. Please note that retrofitting is only partially possible or not possible. If you have any questions about accessories, do not hesitate to contact us.
- Set of four MRI-compatible castors (Ø 100 mm) – Article No. LR-100/VA
- Set of four MRI-compatible castors (Ø 125 mm) – Article No. LR-125/VA
A set comprises four locking castors.
- Infusion (IV) pole, length 1700 mm, with four bottle hooks and table fastening. Mounting clamp included (to mount on the left or the right-hand side of the tabletop frame) – Article No. INF-1720/VA.
Note: Retrofitting is only possible to a very limited extent only. Please check with us before ordering.
- Paper roll holder for table width 650 mm – Article No. P-3050/A
- Paper roll holder for table width 800 mm – Article No. P-3070/A
The paper roll holder will be mounted on the mattress frame at the foot end.
- Patient strapping belt (2200×250 mm, LxW) – Article No. PG-220
- Patient strapping belt (2600×250 mm, LxW) – Article No. PG-260
To secure the patient’s position. Upholstery colours, see here.
- Additional foot pump lever – Article No. FPH-3
Options
