IDEA 2 Treatment Chair

Multifunctional chair height-adjustable by means of an electric 3-stage heavy-duty telescopic column of 4000N (408Kg) capacity providing stability and a high level of safety in every condition of use.

Three independently adjustable sections operated by low tension electric actuators. Variable density paddings for optimal comfort, upholstered with resilient waterproof imitation leather, easy to sanitise and resistant to disinfectants, with antim icrobial treatment based on silver ions. The upholstery covers all the lying surface, hiding all the structure joints, making the surface easy to clean and preventing the patient from coming into contact with mechanical parts. The backrest is equipped with an easy to remove adjustable headrest. Blu Elettrico 5946 is the standard colour upholstery, mor e colours are available as per colour chart. The armrests feature an integrated pushbutton handset holder and have synchronised ergonomic adjustments granting the correct position of the elbow according to the different angles of the backr est. The angles of the armrests can be adjusted vertically, by means of a gas-pump operated by a lever located under th e armrest, and horizontally to ease the lateral ingress and egress of the patient. The base frame and the bearing structure of the lying surface are made of painted steel pipes with thermoformed ABS covers. At the sides, the seat is provided with two 25x10mm normalized bars to host accessories and/or drainage bags, while the base frame features the IV pole receptacle. A case is available at the rear side of the base frame to secure the power cable while moving the chair. As a standard, the chair is equipped with anti-thread, non -marking diam. 100mm swivelling wheels with simultaneous lock/unlock braking system of the 4 wheels and pedal-activated directional mode. A comfortable push-handle is located at the back of the backrest together with an integrated paper roll holder. Upon request, a courtesy led light for reading (optional accessory art. 311100) can be assembled to the pu sh-handle at manufacturing. The push-button handset can be hooked to the armrests and features the following functions:

– safety switch ON and OFF button, 2 leds indicating the type of electricity supply, either power net or battery, once the handset is ON;

– backrest adjustment with led-light signal for activated function;

– seat section adjustment with led-light signal for activated function;

– legrest adjustment with led-light signal for activated function;

– height-adjustment with led-light signal for activated function;

– pre-set push-button Chair position for a quick adjustment back to the original position, in order to ease the egress of the patient;

– pre-set push-button Examination position, simultaneously aligning all the sections to the horizontal;

– pre-set push-button Trendelenburg, with a two-sequence adjustment: the first (comfort Trendelenburg) adjusts seat and legrest at 25° as against the floor and brings the backrest to the horizontal; the second (standard Trendelenburg) aligns all the sections at 12° as against the floor.

When the push-button handset remains unused for a few minutes th e control box goes automatically into auto switch-off mode to cut down power consumption. The system is activated again by pressing the switch-ON push-button on the handset. Upon request, the chair can be supplied with a rechargeable back-up battery (optional accessory art. 311150), allowing adjustments to be performed also when the power connection is not available.

Technical data: Lying surface dimensions: 213×58 cm Dimensions armrests included: cm 213×84 (max) Seat height adjustment range: min. cm 57; max cm 89 Seat angle adjustment range: 5°-25° Backrest adjustment range: 0°- 80° (as against the seat) Legrest adjustment range: 0°- 40° (as against the seat) Trendelenburg: in sequence > 0°/25° > 12 ° Safe working load: 200 kg.

Electrical Characteristics: Line voltage: 230 V +/- 10 % 50 HZ transformed into 24 V; SCHÜKO plug Maximum absorbed power: 370 VA Isolation class: I – TYPE: B Degree of protection: IPX4 The chair is equipped with equipotential connector. MEDICAL DEVICE, CLASS I, IN COMPLIANCE WITH THE EU DIRECTIVE 93/42/CEE, MODIFIED BY THE DIRECTIVE 2007/47/CE. APPLIED TECHNICAL NORMES: CEI EN 60601-1; CEI EN 60601-1-2; The chair is realized according to the production process in compliance with ISO certification 9001 and ISO 13485